Elevation Certificates in Florida: What Home Buyers Need to Know

If a Florida home sits in a FEMA flood zone, the seller, the lender or the insurance agent may ask for an elevation certificate. Many buyers have never seen one. This guide explains what the form measures, who is allowed to sign it, when you actually need it, and what to do if the property has none on file.

What an elevation certificate measures

An elevation certificate shows how high a building sits compared with how high local floodwaters are expected to get. The key number is the First Floor Height, which is the height of the lowest finished floor above the ground. The higher the first floor sits, the less likely the home is to take flood damage, and that is the reason insurers look at it.

The certificate also records the basics of the building: its address, its flood map information and its characteristics. Basements are handled separately. A basement does not count toward First Floor Height, but it is noted on the certificate because it is a sign of flood risk.

The national form is FEMA Form FF-206-FY-22-152, which replaced the older 086-0-33. Communities that take part in FEMA’s Community Rating System must use it. The form is divided into sections. Section A covers the property and the insurance company, Section B covers the flood map information, Section C covers building elevations and requires a survey, and Section F is the owner’s certification. Item A6 asks for at least two clear photographs of the building, and when possible four, one for each side.

Who can sign one

The FEMA instructions say the certificate is completed by a land surveyor, engineer or architect who is authorized by state law to certify elevation information. That requirement applies when elevation information is required or used, for flood zones such as A, AE, AH, AO, V and the AR family. The owner, the owner’s authorized representative or a local floodplain official can complete Sections A and B. The partly completed form then goes to the licensed professional, who completes Section C from a field survey.

In zones AO and A without a base flood elevation, an owner or a local floodplain manager can supply the information in Section E. There is one exception: if the certificate will support a request to change the official flood map (a LOMA, CLOMA, LOMR-F or CLOMR-F), the elevations must be certified.

We do not prepare elevation certificates. A home inspection looks at the building as it stands and reports what it can observe. It does not replace a survey.

Do you need one to get flood insurance?

Usually not. The federal flood program’s consumer site, FloodSmart, says most homeowners do not need an elevation certificate to get flood insurance. The main exception is a high-risk flood area, Zone A or Zone V. In those areas, the certificate can be needed to show that the building meets local safety standards.

Even outside those zones, it is worth checking whether a certificate already exists. An elevation certificate does not set your flood rate, but it can document features that qualify for a discount. FloodSmart puts it plainly: whether a certificate lowers a premium is a “maybe.” The insurer decides the rate, so ask your agent what, if anything, the certificate would change on your policy.

How to find out whether a certificate exists

Start with the local floodplain manager. Floodplain managers often work in a city’s or county’s building, permitting, engineering or land use department. Ask whether an elevation certificate is on file for the exact address. Ask the seller’s agent the same question during the inspection period, because a certificate in the seller’s papers is only useful if it matches the building you are buying.

If there is no certificate on file, you will need a land surveyor, engineer or architect to prepare one. Ask your flood insurance agent before you hire anyone, because the agent knows which items the insurer needs and which ones are optional.

Check the certificate against the house

A certificate is a record of one moment in the building’s life. Before you rely on it, check the points below against the actual house:

  • Address and parcel. The certificate must describe this building, not a neighbor’s home on the same street.
  • Changes since the survey. An added room, a raised floor, a converted garage or a new enclosure can change the measurements. Ask whether any work was done after the certificate was made.
  • Enclosures and flood openings. The form asks whether each enclosed area, such as a crawlspace, has at least one permanent flood opening on two different sides. During a home inspection we look for those vents and check whether they are open and clear.
  • Photographs. The form requires clear photos of the building. Missing or unclear photos are a reason to ask for a corrected copy.

Where a home inspection fits in

A home inspector can tell you what the building looks like at the foundation, the crawlspace, the enclosure and the mechanical equipment. A surveyor measures elevations. Both are useful, and they answer different questions. An inspection can show whether the water heater, the electrical panel or the air handler is at the low end of the house, where water would reach it first. It can also show signs of past water intrusion, such as staining or soft wood at the base of the walls. For a deeper look at flood-related signs, read our guide on flood risk signs a Florida home inspection can reveal.

Flood insurance is also part of the closing budget, which is why it helps to plan the insurance questions early. Our sister insurance company explains what a Florida buyer should check before closing, and our mortgage site covers how the same cost is handled in escrow: Florida property insurance before closing and how escrow handles homeowners insurance and taxes.

Questions buyers ask about elevation certificates

Is an elevation certificate the same as a survey?

No. A survey shows the lot lines and the building footprint. An elevation certificate reports the elevation of the building for flood purposes. A surveyor often prepares both, but they are separate documents.

Can the seller’s old certificate be used for a new buyer?

It can be used as a starting point, but check the address, the date and whether the building has changed. Your agent or lender can tell you whether they will accept the old form.

Who pays for a new certificate?

The cost depends on the surveyor and the work needed, so get written quotes. Who pays is a negotiation between buyer and seller, and it should be written into the contract.

Does a certificate protect me from flood damage?

No. It documents the building’s elevation. It does not prevent water from entering a home, and it does not change whether a lender requires flood insurance. Only a FEMA letter that amends the official flood map can change that requirement.

What to do next

Before you close on a home in a flood zone, ask for the elevation certificate or confirm that none exists. Get the flood zone for the exact address, and ask your agent for a flood insurance quote early. Then schedule the home inspection within the inspection period, so the inspector can check the foundation, the crawlspace and the equipment while the house is open. Our day-by-day inspection schedule shows the timing, and our guide to open permits when buying a Florida home covers a related check that often comes up in the same week.

About the author

Tariq AbouAdma is a Certified Master Inspector (Florida license HI9899) and a HUD 203(k) consultant (A1331) with Quality Real Estate Inspections. This article is general education and does not replace a survey or an inspection of a specific property. For a home inspection in Central Florida, call 321-222-3116.

Quality Real Estate Inspections, 336 Wilshire Blvd, Suite 274-229, Casselberry, FL 32707

Site Map